{"product_id":"graco-booster-basic-r129-podstawka-samochodowa-135-do-150-cm-czarna","title":"Graco Booster Basic R129 car booster seat 135 to 150 cm black","description":" -Graco Booster Basic R129\n-car booster seat\n-for children 135–150 cm tall\n-forward-facing installation\n-secured with a three-point vehicle seat belt\n-removable, soft cover\n-new condition\n\nThe black Graco Booster Basic R129 booster seat is designed for children 135–150 cm tall. It is installed forward-facing on a suitable vehicle seat equipped with a three-point seat belt. The removable, soft cover helps keep the seat clean. Before every journey, ensure the belt is routed correctly and adjusted to fit the child, and check that the seat is securely installed. The manufacturer gives an approximate age range of 7–12 years; the primary criteria are the child’s height and compliance with the instructions. The booster seat does not have ISOFIX connectors. The full Polish manual explains how to route the belt under the armrests and use the shoulder belt positioning clip. Do not follow instructions intended for the earlier Booster Basic R44 version.\n\nCare and safety\nClean the soft components and inner cover with cold water below 30°C. Do not iron, bleach, or dry-clean. Do not wring forcefully; dry in the shade. The detailed recommendations and warnings from the Polish manual are included below.\n\nGraco Booster Basic R129 Type: car seats Colour: black Use: transporting an older child within the 135-150 cm height range Before installation, confirm that the accessory is compatible with the vehicle, car seat, or component it is intended for. Proper installation is important for correct performance while driving.\n\nUse as intended and in accordance with the manufacturer’s recommendations. Check the product regularly; discontinue use if it is damaged.\n\nEN   IMPORTANT\nBEFORE USING THE CAR SEAT, PLEASE READ THE INSTRUCTIONS, WHICH CONTAIN IMPORTANT INFORMATION, AND KEEP THEM FOR FUTURE REFERENCE. READ CAREFULLY. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY PUT YOUR CHILD’S SAFETY AT RISK.\nWARNING:\nIMPORTANT: KEEP FOR FUTURE REFERENCE. READ CAREFULLY.\nNO booster seat can guarantee complete protection from injury in an accident. However, using this booster seat correctly will reduce the risk of your child suffering serious injury or death.\nAlways follow the installation instructions carefully to ensure that the booster seat provides an optimal level of safety.\nEnsure that the rigid and plastic parts of the booster seat are positioned and installed so that they cannot be trapped by a movable vehicle seat or a vehicle door.\nTo use this booster seat in accordance with the ECE R129\/03 standard, the child must meet the following requirements.\nChild height: 135cm-150cm (reference age: 7-12 years).\nForward-facing mode only (in the direction of vehicle travel).\nThe booster seat must be replaced if it has been subjected to severe stress in an accident or has been dropped.\nThis booster seat is intended for use in a car only.\nDo not make any modifications to or add anything to the booster seat without the approval of the type-approval authority. Failure to do so may cause serious safety issues.\nDO NOT use the car seat if its surfaces have become too hot from exposure to sunlight.\nNever leave a child unattended in the booster seat or in the vehicle, even for a few minutes.\nAny luggage or other items that could cause injury in the event of a collision must be properly secured.\nDo not use this booster seat without the soft inserts.\nDo not replace the soft inserts with anything other than those recommended by the manufacturer, as they are an integral part of the booster seat’s effectiveness.\nAlways secure your child in the booster seat, even on short trips, as most accidents happen then. DO NOT leave this booster seat or other objects unsecured in the vehicle. Remove the booster seat from the car if it is not used frequently and store it in a dry place away from sunlight.\nIt is recommended that you do not use a second-hand booster seat with an unknown history. It may have hidden structural damage or defects caused by improper use\/storage.\nDO NOT use any load-bearing contact points other than those described in the instructions and marked on the booster seat.\nDO NOT install this booster seat under the following conditions:\n1. Vehicle seats facing sideways or backwards, relative to the direction of vehicle travel.\n2. Vehicle seats that move during installation.\nContact the retailer about repairs and replacement parts.\nTo avoid burns, never place hot liquids in the booster seat’s drink holders.\nProduct information\n1. This is a universal booster seat for an enhanced child restraint system. It has been approved in accordance with UN Regulation No. 129 for use in vehicles on i-Size and universal seats, as specified by the vehicle manufacturers in the vehicle owner’s manual.\n2. If in doubt, consult the manufacturer or retailer of the enhanced child restraint system.\nProduct Booster seat\nMaterials Plastic, metal, fabrics\nPatent No. Patent pending\nSuitable for Children 135cm-150cm tall (reference age 7-12 years)\nInstallation Forward-facing (in the direction of vehicle travel)\nInstallation notes\nSee figures 1 - 3\nInstallation with a 3-point seat belt\nSee figures 4 - 10\n6 Insert the end of the shoulder belt positioning strap into the opening in the base.\n! Check the direction of the shoulder belt guide to avoid injuring the child’s back if the shoulder belt guide is facing the wrong way. 10\n! Pull the shoulder belt positioning clip strap to ensure that it is attached to the base.\n7 Pass the webbing strap and buckle through the armrest, then tighten the webbing strap.\n8 Slide the shoulder belt guide to adjust the length of the strap.\n! Pass the shoulder belt through the shoulder belt positioning clip and slide the clip to ensure it is close to the child’s shoulder, 9 -1. Fasten the vehicle seat belt. 9 -3\n! For the safest installation, we recommend positioning the shoulder belt clip level with the highest point of the child’s shoulder.\nDO NOT route the vehicle seat belt over the armrests. It must pass underneath them. 9 -2\nDo not use the booster seat if the vehicle seat belt buckle (female end) is too long to securely fasten the booster seat. 9 -4\n! Press the booster seat firmly against the backrest of a forward-facing vehicle seat equipped with a lap-and-shoulder belt.\n! After placing the child in the booster seat, fasten the seat belt correctly and ensure that all lap belts are secured low down so that they fit snugly over the hips. 9\n! All straps securing the booster seat to the vehicle must be tight, all straps restraining the child must fit the child’s body, and the straps must not be twisted.\nRear view of a child seated in the car seat. 10\n! The shoulder belt positioning clip must pass through the horizontal bar on the base as far as possible from where the vehicle’s shoulder belt crosses the child’s body.\n! When not in use, store the shoulder belt positioning clip underneath the base.\nUsing the drink holders\nSee figure 11\nRemoving the soft components\nSee figure 12\nCare and maintenance\nWash the soft components and inner cover in cold water below 30°C.\nDo not iron the soft components.\nDo not bleach or dry-clean the soft components.\nDo not use undiluted gasoline with neutral detergent or other organic solvents to clean the booster seat. They may damage the booster seat.\nDo not wring the soft components or inner cover forcefully to dry them. This may cause them to crease.\nHand-dry the soft components and inner cover in the shade.\nRemove the booster seat from the vehicle seat if it will not be used for a long time. Store the booster seat in a cool, dry place, out of the child’s reach.\ngracobaby.eu\nwww.gracobaby.pl\n\nFAQ\nWhat height is the booster seat suitable for?\n135–150 cm. The manufacturer’s stated age range of approximately 7–12 years is a guideline.\n\nHow is it installed in the car?\nForward-facing, according to the instructions, using a three-point vehicle seat belt. It does not have ISOFIX attachments.\n\nAt what temperature should the cover be cleaned?\nThe Polish manual specifies cold water below 30°C. Do not iron, bleach, or dry-clean the cover.\n\nSpecifications\nDispatch time: 24 hours\n\nSafety documents\nOriginal Polish manual — Booster Basic R129 \/ polish-manual: https:\/\/dl.gracobaby.eu\/instruction-manual\/booster-basic-r129-manual.pdf","brand":"Graco","offers":[{"title":"Default Title","offer_id":54465496744283,"sku":"B0BMGQCHFV","price":9201.8,"currency_code":"HUF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1029\/8019\/0555\/files\/B0BMGQCHFV.01.LZZZZZZZ.jpg?v=1792689371","url":"https:\/\/outletbaby.hu\/en\/products\/graco-booster-basic-r129-podstawka-samochodowa-135-do-150-cm-czarna","provider":"OutletBaby","version":"1.0","type":"link"}